Liquid composition and quantity are decisive
Condensate may contain dispersed oil, stable emulsions and other contaminants. Design therefore depends on the suitability of the particular technology, liquid flow and operating conditions. A clear-looking outlet does not by itself confirm composition or permission to discharge into a particular sewer.
How QWIK-PURE fits in
In active QWIK-PURE versions, controlled air pulses force condensate through filter cartridges. This differs from purely gravity-driven flow. Capacity and connection requirements must be checked for the chosen size. See the detailed range of condensate separators.
What to check in practice
- List condensate sources and the maximum expected quantity.
- Verify that the equipment suits the liquid composition and documented application.
- Arrange outlet monitoring and correct handling of used media.
Example scenario
The calculation assumes 5 L/h for 8 hours, or about 40 litres per day. Separator sizing must also handle instantaneous drain discharges and more demanding summer conditions. The daily average alone does not determine the correct size or documented outlet quality.
What to watch out for
- Confusing the device with the compressor's oil separator.
- Assuming installation automatically permits condensate discharge.
- Ignoring saturation or an alarm simply because liquid is still flowing out.
Can every condensate be treated with the same separator?
No. The contamination type and intended use of the particular equipment must be checked. Difficult emulsions or other admixtures may require different treatment. A universal residual oil content cannot be promised without supporting data.