Kompresory PEMA s.r.o.
EN
Menu
20+ service techniciansThe largest compressor rental fleet in Czechia and SlovakiaImmediate response, 24/79 branches in Czechia and Slovakia
PEMA · INDEPENDENT SUPPLY AND SERVICE

Compressors Atlas Copco

The largest independent supplier and service provider for Atlas Copco compressors.

We supply the compressor and provide scheduled maintenance and overhauls. During downtime, we help with a backup compressed air source. The PEMA team handles everything.

Compare oil-injected G/GX and GA ranges with oil-free SF and ZT/ZR according to your production needs.

Independent advice · supply · service · overhauls
REAL INSTALLATIONS AND SERVICE

Atlas Copco compressors in use

Compressor rooms, deliveries and servicing. Explore PEMA projects.

OIL-INJECTED AND OIL-FREE COMPRESSORS

Which Atlas Copco compressor should you choose?

The basic classification is by compression technology: oil-injected screw G/GX and GA, oil-free scroll SF, and oil-free tooth or screw ZT/ZR. Within each family, we then choose the power, controls and equipment. VSD or FF alone does not denote a separate compressor family.

Comparison of the main compressor families
RangeCompression principleWhat to consider when choosing
G / GXOil-injected screwConfiguration and specifications of the individual model
GAOil-injected screwAir demand, controls and downstream filtration
SFOil-free scrollRequired flow, configuration and air purity
ZT / ZROil-free tooth / screwAir or water cooling, drying and operating conditions
ATLAS COPCOGA

Atlas Copco GA: compressed air for industrial production

The GA range uses oil-injected screw compression. It is designed to generate compressed air for industrial operations. Selection considers the required flow, working pressure and downstream air treatment for the specific process.

Fixed-speed versions and GA VSD variable-speed models allow control to be matched to demand. VSD adjusts motor speed to the current air requirement. Its benefit must be assessed from consumption patterns, not just the motor's rated power.

  • Oil-injected screw technology
  • Fixed speed or VSD control, depending on the model
  • Dryer and filter selection based on required air quality

How are Atlas Copco GA compressors classified?

GA is a family of oil-injected screw compressors. Within it, we distinguish the control method, specific design and equipment. These details must be read together.

GA and GA+ · fixed speed

When running, the motor operates at fixed speed. Air delivery is controlled by loading and unloading, or by stopping the machine. This design is worth considering for steady base demand or as part of a multi-compressor station. GA+ denotes a version within a model group; the plus sign does not mean VSD.

GA FLX · two-speed operation

FLX is a two-speed solution. It uses different operating modes when loaded and unloaded; it is not the same as continuously variable VSD control. When choosing, we compare its operating behaviour with fixed-speed and VSD machines using the same demand profile.

GA VSD · variable-speed control

VSD stands for Variable Speed Drive. Motor speed adjusts to compressed air demand within the machine's operating range. This can suit varying demand, but minimum flow and coordination with other compressors must always be considered.

GA VSD+ · another variable-speed design

VSD+ denotes specific variable-speed design ranges. The choice is not based on the plus sign alone: we compare performance at the required pressure, control range and equipment of the particular model.

GA VSDs · a newer generation of variable-speed machines

VSDs, also written VSDˢ, is a newer generation in the relevant power classes. For the GA 5–37 VSDs range, the manufacturer cites features such as advanced temperature control and Boost Flow. It is not a designation that automatically replaces every VSD or VSD+ version across the entire power range.

FF / Full Feature: dryer integrated into the compressor

FF is combined with the range and control designation. For example, in GA 37 VSD FF GA denotes the product family, 37 the model power designation, VSD variable-speed control, and FF the version with an integrated dryer. Exact specifications and accessories are defined in the machine's technical data sheet.

An integrated dryer makes a compact station easier to assemble. Required filtration, pressure dew point and air quality at the point of use must still be designed around your process.

Operating needs matter more than the longest model name

To compare GA variants, we need the demand profile, pressure at the points of use and operating duration. We also assess idle running, pressure losses and control of the entire station. We confirm availability of the specific version when preparing the quote. We do not promise a percentage saving without knowing the starting conditions.

Discuss the range GA for my operation
ATLAS COPCOG / GX

Atlas Copco G and GX: standard screw compressors

The G and GX ranges complement GA in Atlas Copco's oil-injected screw compressor offering. Smaller models serve workshops and light manufacturing; the G family also includes larger industrial machines. It cannot therefore be described simply as a range of small workshop compressors.

Comparison with GA depends on the individual model's specifications, controls and operating costs. Receiver-mounted versions and integrated dryers depend on the model group. We assess the suitability and availability of a specific setup against your requirements.

  • Oil-injected screw technology
  • Power and configuration by model group
  • Comparison with GA based on pressure, flow and operation
Discuss the range G / GX for my operation
ATLAS COPCOSF

Atlas Copco SF: oil-free air from a scroll compressor

Atlas Copco SF compressors use scroll technology without oil injection into the compression chamber. This range is worth considering where reducing oil contamination risk and having a compact air source are important.

The SF family offers different configurations, including multi-module versions. We choose the setup according to required flow, operating pattern and installation space. Oil-free compression alone does not address moisture or every contaminant, so air treatment remains part of the design.

  • Oil-free scroll technology
  • Compact source for oil-sensitive applications
  • Configuration and accessories matched to operation

SF, SF+ and SFe: one technology, different versions

The scroll compressor family includes SF, SF+ and SFe designations. Design, control and configuration vary by model. In multi-module setups, controls may adjust air delivery by switching individual compression elements on and off. This differs from continuously variable speed control in GA VSD.

Selection considers actual flow, frequency of demand and air purity requirements. The oil-free designation does not replace the design of drying and filtration for a specific application.

Discuss the range SF for my operation
ATLAS COPCOZT / ZR

Atlas Copco ZT and ZR: oil-free compression for industry

Atlas Copco ZT and ZR compressors produce compressed air without injecting oil into the compression chamber. ZT uses air cooling, while ZR uses water cooling. The tooth or screw design is determined by the specific model group, not by the letters ZT or ZR alone.

Selection is based on the required flow rate, pressure, air quality and available cooling. For ZT, we address ventilation and heat removal; for ZR, the cooling water parameters. Drying, filtration and backup in case of downtime are also part of the design.

  • ZT: air cooling · ZR: water cooling
  • Tooth or screw technology depending on the model
  • Fixed speed, VSD or another version depending on the specific range

ZT and ZR: cooling method comes first

ZT is air-cooled, while ZR is water-cooled. This does not distinguish tooth compressors from screw compressors. Both designations appear across different compression technologies in the manufacturer's portfolio. We therefore verify the tooth or screw design for the specific model range.

ZT/ZR control and equipment

Depending on the model group, the manufacturer offers fixed speed, VSD or VSD+; selected tooth compressors also offer two-speed FLX. Not every combination is available at every power rating. When comparing options, we consider cooling, operating range, dryer configuration and installation conditions.

Discuss the range ZT / ZR for my operation

Other Atlas Copco industrial ranges

GA, G/GX, SF and ZT/ZR do not cover the manufacturer's entire portfolio. The following technologies are also available for specific conditions. PEMA will assess supply and service options individually according to your requirements.

AQ · oil-free with water injection

Screw technology using water injection into the compression chamber. It belongs to the oil-free group, but its design differs from both SF and ZT/ZR.

ZH / ZH+ · centrifugal compressors

Turbo compressors for applications with high compressed air demand. They are assessed in the context of the entire industrial compressor station.

ZA / ZE · low-pressure compressors

An oil-free screw solution for low-pressure processes. It requires different specifications from a standard plant air distribution system.

Mobile compressors, high-pressure systems, piston compressors and blowers serve different purposes. We select them separately according to the application's needs.

INDEPENDENT SUPPLIER AND SERVICE PROVIDER

Supply and service.
Independently.

Explore Atlas Copco servicing

The largest independent supplier and service provider for Atlas Copco compressors. From choosing your machine to its long-term operation, you have one partner – PEMA.

We assess suitable technology, arrange delivery and provide ongoing servicing, diagnostics or a complete overhaul. During downtime, we can supply a replacement compressor from our rental fleet.

We are not an authorised dealer, authorised service centre or official representative of Atlas Copco. Your commercial offer and scope of services are agreed directly with Kompresory PEMA.

DATA-DRIVEN SELECTION

From air requirements to a complete compressor station

The purchase price is only part of the decision. Equally important is how the system performs under normal load, at peak demand and outside the main shift.

Independent Atlas Copco service
  1. Describe your operation

    Send us the required pressure and flow rate, shift pattern and air quality requirements. For an existing station, a nameplate and operating data are helpful.

  2. Compare the complete system

    Besides the compressor, consider the dryer, filters, air receiver, pipework, condensate drainage and installation conditions.

  3. Choose how to acquire it

    As well as purchasing outright, you can discuss operating lease or long-term rental. We will confirm availability of the specific solution in our offer.

FREQUENTLY ASKED QUESTIONS

What to know before choosing a compressor

What is the difference between GA+, GA VSD, VSD+ and VSDs?

Within the relevant model groups, GA and GA+ designate fixed-speed compressors. GA VSD, VSD+ and VSDs have variable speed control. The variants differ in design and equipment; availability depends on the power class and machine generation. The plus sign in GA+ alone does not mean VSD control.

What does FF mean on an Atlas Copco compressor?

FF stands for Full Feature. On the GA compressors described here, it indicates a version with an integrated air dryer. It is equipment fitted to a particular machine, not a separate compressor range or control method. We verify filtration and other accessories for the specific configuration.

What is the difference between Atlas Copco GA, SF and ZT compressors?

GA are oil-injected screw compressors. SF use oil-free scroll technology. ZT are air-cooled oil-free compressors with tooth or screw technology depending on the model. The deciding factors are the required air quality, flow rate, pressure and operating pattern.

When does a GA compressor with VSD control make sense?

Speed control is particularly worth considering when air demand varies. We assess whether a particular machine is suitable using measured consumption and the operation of other compressors alongside it. Savings cannot be determined from the VSD designation alone.

How much does an Atlas Copco industrial compressor cost?

The price depends on the specific range, power, pressure, control and accessories. Include installation, electricity consumption and servicing in your comparison. For a quotation, send us the required pressure, flow rate and operating hours, or details of your existing compressor.

Is PEMA an authorised Atlas Copco dealer?

No. Kompresory PEMA operates as an independent supplier and service provider for Atlas Copco compressors. We are not an authorised dealer, authorised service centre or official representative of this brand. You arrange supply, servicing and complete overhauls directly with PEMA.

PEMA LEASE · OPERATING LEASE

COMPRESSOR ROOM
ON AN OPERATING LEASE

You handle production. We handle the compressor.

You do not have to look after the compressor on your own. With PEMA LEASE, we take on the agreed care of the supplied machine. You get a clear budget and more time for your work.

  • Scheduled servicing and routine repairs included in the monthly payment
  • Operational support according to the selected option
  • One partner to call
How operating leasing works
Completed PEMA compressor roomCompressor transport and handling at PEMA facilitiesREDBOX outdoor compressor stationAtlas Copco compressor delivery by the PEMA team

OUR REFERENCES
SPEAK FOR THEMSELVES.

Real machines. Real operations. See where our work helps keep production running every day.

See for yourself
LET'S CHOOSE THE RIGHT RANGE

Looking for an Atlas Copco compressor for your operation?

Send us your requirements or details of your existing machine. We will discuss the technical options, accessories and ways to acquire it.

REAL INSTALLATIONS AND SERVICE

Atlas Copco compressors in use

Compressor rooms, deliveries and servicing. Explore PEMA projects.

ContactEnquiry